Thus I’m sitting within the kitchen in the center of the day obtaining ready to observe a soccer game, I’ve got the oven going with the mini hotdogs, obtaining ready to settle in when it happened…I’m sweating!

That’s once I decided to put in a ceiling fan. A ceiling fan offers many practical benefits whereas adding a bound ornamental bit to a room. Within the summer it can facilitate cool a area (or even a porch). Within the winter it will be used at low speeds to flow into hotter air that has risen to ceiling level.

Whatever your reason for putting in a ceiling fan, you’ll notice it to be a relatively easy project especially if you may be replacing a light-weight fixture in the middle of a room (all the wiring will already be there). Most likely your biggest obstacle will be a replacement workbox that’s approved for the load of an overhead fan or adding support to an existing workbox, a workbox that’s not approved for ceiling fan weight can lead to disaster!

The following directions cover general installations when replacing an existing light. It will give you an plan of what is needed for the project. Build certain you review and follow instructions that are specific to the fan you purchase. Depending on your installation requirements, you’ll want to purchase a longer “down rod” for cathedral ceilings or purchase an optional lighting kit if it’s not included.

1)    Flip off the circuit by switching off the breaker. Take away the prevailing ceiling fixture.

a pair of)    Determine if your existing workbox can offer enough support. If you’ve got access to the workbox from your attic, check to work out if the workbox has metal cross braces that span between two joists. If not, you’ll be able to cut a 2”x4” to suit in between the joists. Install it so it touches the high of the workbox. Anchor the wood in place. From the space, use 1” drywall screws to anchor the box to the wood brace.

three)    If you do not have access from the attic, you’ll install a metal cross brace through the rough gap in your ceiling and then attach an approved workbox to the metal brace.

four)    I hate this part! Assemble the ceiling fan in step with the makers provided instructions. When you’re prepared to hold the fan, take the mounting bracket and install it to the ceiling workbox. Some fans come with a hanging frame that permits you to hook the ball finish of the down rod in place. Others come with a bracket that has a “J” hook that permits you to hang the motor housing while hooking up the wiring

five)    If you removed a light-weight fixture from the ceiling, possibly the prevailing wiring can provide one switched circuit to your new ceiling fan. This means the wall switch will function because the master switch to flip the unit off and on. The pull chain on the fan will conjointly control the fan (and its speed). If you put in an optional light kit on the fan, each the wall switch and a pull chain can additionally control it.

6)    Following the wiring diagram given the fan, hook up the wires using wire nuts. Presumably this is as easy as connecting the 2 black wires; connecting the 2 white wires and connecting the two ground wires.

seven)    Once the fan is wired, end its assembly according to the specific manufacturer’s instructions. You may want to install the cover to the top of the rod.

8)You will additionally need to connect the fan blades. If you’re putting in a light kit, take away the cover on the underside of the fan where the sunshine kit will be mounted. Following the manufacturer’s instructions, assemble and install the light kit. 
At this point you are prepared to switch the breaker on and start enjoying your new ceiling fan.

Heaven’s Best carpet cleaning is worldwide leader in carpet cleaning, tile and grout cleaning, and upholstery cleaning. There are many carpet cleaners to choose from, but when you choose Heaven’s Best carpet cleaning, we’ll leave your floors looking, feeling, and even smelling great. Visit this site: Heaven’s Best carpet cleaning!

Tags: ceiling fan, fan, Furniture, home, Home Improvement, installing a ceiling fan